|
|
|
|
|
|
 |
Model IWP an in-line water purifier and its portable version Model IWP (P) have been developed from Pre-Mac's highly successful range of portable water purification equipment. This equipment has seen outstanding service in all parts of the world by humanitarian aid organisations and peace-keeping forces. Model IWP makes available the benefits of this proven technology in domestic, commercial and medical environments using Pre-Mac's unique and patented system of water purification.
Both Models IWP and IWP (P) are designed to supply purified water from a pressurised mains water supply. The novel, twin-tap design supplies purified water for general use, such as food preparation, as well as microbiologically safe, fresh-tasting, high quality drinking water. The IWP is supplied complete with mounting bracket, fountain taps and tubing. The unit has been designed for ease of installation. Model IWP (P) is supplied in a standard NATO aluminium protective case, complete with quick fit connectors and tubing. This unit has been designed for ease of installation and transportation.
|
|
|
|
Weight: | 7 kgs | 13.5 kgs |
Size:
Width: Height: |
360 mm 130 mm |
570 mm 235 mm |
Treatment Capacity: | 20,000 litres per cartridge change. | 20,000 litres per cartridge change. |
Flow Rate: | 3.5 litres per minute (Flow restriction valve fitted) | 3.5 litres per minute (Flow restriction valve fitted) |
Pressure Ratings: | Min. operating pressure: 20 psi Max operating pressure: 80 psi With new cartridges a pressure drop of 5 psi from water inlet to outlet. | Min. operating pressure: 20 psi Max operating pressure: 80 psi With new cartridges a pressure drop of 5 psi from water inlet to outlet. |
Operating Temperature: | 0°C to 30°C (Do not pass hot water through it) | 0°C to 30°C (Do not pass hot water through it) |
Purification Stages: |
- A graded polypropylene depth filter of 3 micron in absolute rating. - An iodine-resin cartridge filled with a specially formulated disinfection media. This is designed to release a low residual of the active disinfecting agent into the treated water. - A carbon block manufactured from Polyolefin bonded powdered activated carbon. |
- A graded polypropylene depth filter of 3 micron in absolute rating. - An iodine-resin cartridge filled with a specially formulated disinfection media. This is designed to release a low residual of the active disinfecting agent into the treated water. - A carbon block manufactured from Polyolefin bonded powdered activated carbon. |
Microbiological Test Data: | Removal levels of: Bacteria - greater than 99.9999% Viruses - greater than 99.9% Cysts - greater than 99.9% | Removal levels of: Bacteria - greater than 99.9999% Viruses - greater than 99.9% Cysts - greater than 99.9% |
|
 |
Registered in England No : 1927161 Registered Office : 12 Lonsdale Gardens,
Tunbridge Wells, Kent, TN1 1PA |
